Interaction of calcium phosphate and CaO (CaCO3) while their disposing on the titanium surface under gas detonation conditions

Authors

  • I.V. Zatovsky Taras Shevchenko National University of Kiev
  • I.O. Nikolenko Taras Shevchenko National University of Kiev
  • M.S. Slobodyanik Taras Shevchenko National University of Kiev
  • N.I. Klyui Taras Shevchenko National University of Kiev
  • V.P. Temchenko Taras Shevchenko National University of Kiev

DOI:

https://doi.org/10.15407/dopovidi2017.05.066

Keywords:

calcium phosphates, coating, gas detonation deposition, metallic implants

Abstract

The gas detonation deposition of calcium hydrogen phosphate and CaO (CaCO3) has been conducted on the titanium surface. Powder XRD and IR-spectroscopy have been performed for the composition analysis of the obtained coating. It has been shown that, using such technology, the composite compounds can be obtained, by basing on Ca3(PO4)2, Ca10(PO4)6O, Ca5(PO4)3OH precursors. Such synthetic route demonstrates new possibilities for improving the technologies of obtaining metallic implants for medical use.

Downloads

Download data is not yet available.

References

Long, M. & Rack, H. J. (1998). Titanium alloys in total joint replacement a material science perspective. Biomaterials, 19, pp. 1621-1639. https://doi.org/10.1016/S0142-9612(97)00146-4

Huiskes, R., Weinans, H. & Van Rietbergen, B. (1992). The relationship between stress shielding and bone resorption around hip stems and the effects of flexible materials. Clin. Orthop. Relat. Res., 274, pp. 124-134. https://doi.org/10.1097/00003086-199201000-00014

Manda, M. G., Psyllaki, P.P., Tsypas, D.N. & Koidis, P.T. (2009). Observations on an in-vivo failure of a titanium dental implant/abutment screw system: a case report. J. Biomed. Mater. Res. B Appl. Biomater, 89, pp. 264-273. https://doi.org/10.1002/jbm.b.31211

Ong, J. L. & Chan, D. C. N. (2000). Hydroxyapatite and their use as coatings in dental implants: A review. Crit. Rev. Biomed. Eng., 28, pp. 667-707. https://doi.org/10.1615/CritRevBiomedEng.v28.i56.10

Schliephake, H., Scharnweber, D., Roesseler, S., Dard, M., Sewing, A. & Aref, A. (2006). Biomimetic calcium phosphate composite coating of dental implants. Int. J. Oral Max. Impl., 21, pp. 738-746.

Dorozhkin, S.V. (2010). Calcium Orthophosphates as Bioceramics: State of the Art. J. Funct. Biomater., 1, pp. 22-107. https://doi.org/10.3390/jfb1010022

Hahn, B. D., Park, D. S., Choi, J. J., Ryu, J., Yoon, W. H., Kim, K. H., Park, C. & Kim, H. E. (2009). Dense nanostructured hydroxyapatite coating on titanium by aerosol deposition. J. Am. Ceram. Soc., 92, pp. 683-687. https://doi.org/10.1111/j.1551-2916.2008.02876.x

Kobayashi, T., Itoh, S., Nakamura, S., Nakamura, M., Shinomiya, K. & Yamashita, K. (2007). Enhanced bone bonding of hydroxyapatite-coated titanium implants by electrical polarization. J. Biomed. Mater. Res. A, 82A, pp. 145-151. https://doi.org/10.1002/jbm.a.31080

Onoki, T. & Hashida, T. (2006). New method for hydroxyapatite coating of titanium by the hydrothermal hot isostatic pressing technique. Surf. Coat. Technol., 200, pp. 6801-6807. https://doi.org/10.1016/j.surfcoat.2005.10.016

Mohseni, E., Zalnezhad, E. & Bushroa, A.R. (2014). Comparative investigation on the adhesion of hydroxyapatite coating on Ti-6Al-4V implant: a review paper. Int. J. Adhes. Adhes., 48, pp. 238-257. https://doi.org/10.1016/j.ijadhadh.2013.09.030

Singh, L., Chawla, V. & Grewal, J.S. (2012). A review on detonation gun sprayed coatings. J. Miner. Mater. Charact. Eng., 11, pp. 243-265. https://doi.org/10.4236/jmmce.2012.113019

Klyui, N. I., Temchenko, V. P., Gryshkov, A. P., Dubok, V. A., Shynkaruk, A. V., Lyashenko, B. A. & Barynov, S. M. (2011). Properties of the hydroxyapatite coatings, obtained by gas-detonation deposition onto titanium substrates. Funct. Mater., 18, pp. 285-292.

Gryshkov, O., Klyui, N., Temchenko, V. & Glasmacher, B. (2015). Deposition of bioactive and bioinert ceramic coatings on magnesium using detonation. Biomed. Tech., 60, S375.

Nosenko, V., Strutynska, N., Vorona, I., Zatovsky, I., Dzhagan, V., Lemishko, S., Epple, M., Prymak, O., Baran, N., Ishchenko, S., Slobodyanik, N., Prylutskyy, Yu., Klyui, N., & Temchenko, V. (2015). Structure of biocompatible coatings produced from hydroxyapatite nanoparticles by detonation spraying. Nanoscale Res. Lett., 10, pp. 1-7. https://doi.org/10.1186/s11671-015-1160-4

Gryshkov, O., Klyui, N. I., Temchenko, V. P., Kyselov, V. S., Chatterjee, A., Belyaev, A. E., Lauterboeck, L., Iarmolenko, D. & Glasmacher, B. (2016). Porous biomorphic silicon carbide ceramics coated with hydroxyapatite as prospective materials for bone implants. Mater. Sci. Eng. C, 68, pp. 143-152. https://doi.org/10.1016/j.msec.2016.05.113

Published

08.09.2024

How to Cite

Zatovsky, I., Nikolenko, I., Slobodyanik, M., Klyui, N., & Temchenko, V. (2024). Interaction of calcium phosphate and CaO (CaCO3) while their disposing on the titanium surface under gas detonation conditions . Reports of the National Academy of Sciences of Ukraine, (5), 66–72. https://doi.org/10.15407/dopovidi2017.05.066