Studying the Tribological Properties of n-alkanes Monolayer Films on Atomic Flat Surface of Gold
DOI:
https://doi.org/10.15407/scine15.04.062Keywords:
atomically flat surfaces, coefficient of friction, friction force, monolayer films of n-alkanesAbstract
Introduction. The establishment of regularities of the microcontact interaction in the friction interface formed by two moving bodies is an important step towards the creation of new classes of materials with predefined physicochemical properties. The relative motion of interacting surfaces inevitably results in wearing contact areas (microcontacts) of these surfaces, that is, it leads to the formation of pieces that are caused by destruction of more elastic material.
Problem Statement. The destruction of the interface decreases significantly by applying lubricant films to the contact area. In the case of dry friction (no lubricant), the description of the contact area is a practically solved problem (the Hertz and the Johnson-Kendal-Roberts contact theories), while the presence of lubricant complicates it, i.e., one should consider the rheological component of friction and the interaction of interfaces. In addition, the overwhelming majority of tribological studies were carried out using imperfect (rough) surfaces and lubricant films with uncertain component composition, thickness, and structure.
Purpose. To establish the influence of the structure of self-assembling n-alkanes monolayers on their tribological properties in the frictional interface.
Materials and Methods. The atomically flat surface of gold and one-component monolayer films of n-alkanes
(CnH2n+2, n = 14, 16, 48, 50, 60) are used as materials. The scanning tunneling microscopy method is used to establish the structure of self-assembled monolayers on the gold surface as well as to control stability of monolayers before and after the tribological measurements. The kinetic coefficient of friction μko of interfaces have been studied using a magnetic levitation tribometer.
Results. The nonmonotonic dependence of kinetic friction coefficient μko on the length of n-alkane molecule has been experimentally established.
Conclusions. The kinetic friction coefficient μko has been established to abnormally decrease for the n-alkanes with “magic length” (n times 16).
References
Polyakov, B., Vlassov, S., Dorogin, L. M., Novoselska, N., Butikova, J., Antsov, M., Oras, S., Lohmus, R., Kink, I. (2014). Some aspects of formation and tribological properties of silver nanodumbbells. Nanoscale Research Letters, 9, 186, 1-8.
https://doi.org/10.1186/1556-276X-9-186
Polyakov, B., Vlassov, S., Dorogin, L., Butikova, J., Smits, K., Antsov, M., Oras, S., Zabels, R., Lohmus, R. (2015). Metal nanodumbbells for nanomanipulations and tribological experiments. Physica Scripta, 90(9), 094007(1-7).
https://doi.org/10.1088/0031-8949/90/9/094007
Denape, J. (2015). Third body concept and wear particle behavior in dry friction sliding conditions. Key Engineering Materials, 640, 1-12.
https://doi.org/10.4028/www.scientific.net/KEM.640.1
Persson, B. N. J. (1998). Sliding Friction: Physical Principles and Applications. Berlin, Springer-Verlag, 1998.
Persson, B. N. J. (1999). Sliding friction. Surf. Sci. Rep., 33(3), 83-119.
https://doi.org/10.1016/S0167-5729(98)00009-0
Persson, B. N. J. (1995). Theory of friction: Stress domains, relaxation, and creep. Phys. Rev., B 51(19), 13568-13585.
https://doi.org/10.1103/PhysRevB.51.13568
Vakis, A. I., Yastrebov, V. A., Scheibert, J., Nicola, L., Dini, D., Minfray, C., Almqvist, A., Paggi, M., Lee, S., Limbert, G., Molinari, J. F., Anciaux, G., Echeverri Restrepo, S., Papangelo, A., Cammarata, A., Nicolini, P., Aghababaei, R., Putignano, C., Stupkiewicz, S., Lengiewicz, J., Costagliola, G., Bosia, F., Guarino, R., Pugno, N. M., Carbone, G., Müser, M. H., Ciavarella, M. (2018). Modeling and Simulation in Tribology Across Scales: an Overview. Trib. Int., 125, 169-199.
https://doi.org/10.1016/j.triboint.2018.02.005
Askadskaya, L., Rabe, J. P. (1992). Anisotropic molecular dynamics in the vicinity of order-disorder transitions in organic monolayers. Phys. Rev. Lett., 69(9), 1395-2002.
https://doi.org/10.1103/PhysRevLett.69.1395
Marchenko, O., Cousty, J. (2000). Molecule length-induced reentrant self-organization of alkanes in monolayers adsorbed on Au(111). Phys. Rev. Lett., 84(23), 5363-5366.
https://doi.org/10.1103/PhysRevLett.84.5363
Marchenko, A., Cousty, J., Pham-Van, L. (2002). Magic Length Effects in the Packing of n-Alkanes Adsorbed on Au(111). Langmuir, 18, 1171-1175.
https://doi.org/10.1021/la010827m
Vasko, A. A., Kutsenko, V. Ye., Marchenko, A. A., Braun, O. M. (2019). Lowering of friction in monolayers of mixed alkanes. Tribol. Lett., 67(49), 1-7.
https://doi.org/10.1007/s11249-019-1163-x
Binnig, G., Quate, C. F., Gerber, C. (1986). Atomic force microscope. Phys. Rev. Lett., 56(9), 930-934.
https://doi.org/10.1103/PhysRevLett.56.930
Mate, C. M., McClelland, G. M., Erlandsson, R., Chang, S. (1987). Atomic-scale friction of a tungsten tip on a graphite surface. Phys. Rev. Lett., 59(17), 1942-1945.
https://doi.org/10.1103/PhysRevLett.59.1942
Bhushan B. Handbook of Micro / Nanotribology. CRC, Boca Raton, Florida. 1998. 880pp.
Vasko, A.A., Braun, O.M., Marchenko, O.A., Naumovets, A. G. (2018). Magnetic levitation tribometer: a point-contact friction. Tribol. Lett., 66(74), 1-5.
https://doi.org/10.1007/s11249-018-1024-z
MCGonigal, G.C., Bernhard, R.H., Thomson, D.J. (1990). Imaging alkane layers at the liquid/graphite interface with the scanning tunneling microscope. Appl. Phys. Lett., 57(1), 28-30.
https://doi.org/10.1063/1.104234
Marchenko, A., Lukyanets, S., Cousty, J. (2002). Adsorption of alkanes on Au(111): Possible origin of STM contrast at the liquid/solid interface. Phys. Rev., B 65(4), 04514(1-5).
https://doi.org/10.1103/PhysRevB.65.045414
Denicolo, I., Doucet, J., Craievich, A. F. (1983). X‐ray study of the rotator phase of paraffins (III): Even‐numbered paraffins C18H38, C20H42, C22H46, C24H50, and C26H54. J. Chem. Phys., 78(3), 1465-1469.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Copyright Notice Authors published in the journal “Science and Innovation” agree to the following conditions: Authors retain copyright and grant the journal the right of first publication. Authors may enter into separate, additional contractual agreements for non-exclusive distribution of the version of their work (article) published in the journal “Science and Innovation” (for example, place it in an institutional repository or publish in their book), while confirming its initial publication in the journal “Science and innovation.” Authors are allowed to place their work on the Internet (for example, in institutional repositories or on their website).
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.