Development of Hardware and Software for the System of Remote Control of Geometrical Parameters of Railcar Wheelsets

Ye.V. Shapovalov; V.O. Koliada; D.D. Topchev; N.F. Lutsenko; A.M. Mangold

doi:10.15407/scine13.02.033

Development of Hardware and Software for the System of Remote Control of Geometrical Parameters of Railcar Wheelsets

Authors

Ye.V. Shapovalov Paton Electric Welding Institute, the NAS of Ukraine
V.O. Koliada Paton Electric Welding Institute, the NAS of Ukraine
D.D. Topchev Paton Electric Welding Institute, the NAS of Ukraine
N.F. Lutsenko Paton Electric Welding Institute, the NAS of Ukraine
A.M. Mangold Paton Electric Welding Institute, the NAS of Ukraine

DOI:

https://doi.org/10.15407/scine13.02.033

Keywords:

geometric parameters, laser triangulation sensor, railcars, remote inspection, sensor units, wheelsets

Abstract

A hardware-software complex for the system of remote control of geometrical parameters of railcar wheelsets has been developed. The system is designed for non-contact scanning of wheel working surface profiles and automatic evaluation of wheelset technical condition during the train movement. The application of results to the railways carriage facilities will significantly improve the qualitative and quantitative control of wear parameters and will raise traffic safety due to timely detection of wheelset dangerous defects.

Downloads

Published

2024-08-27

How to Cite

Shapovalov, Y., Koliada, V., Topchev, D., Lutsenko, N., & Mangold, A. (2024). Development of Hardware and Software for the System of Remote Control of Geometrical Parameters of Railcar Wheelsets. Science and Innovation, 13(2), 33–42. https://doi.org/10.15407/scine13.02.033

Download Citation

Issue

Vol. 13 No. 2 (2017): Science and Innovation

Section

Research and Technical Innovative Projects of the National Academy of Sciences of Ukraine

License

Copyright (c) 2024 Copyright Notice Authors published in the journal “Science and Innovation” agree to the following conditions: Authors retain copyright and grant the journal the right of first publication. Authors may enter into separate, additional contractual agreements for non-exclusive distribution of the version of their work (article) published in the journal “Science and Innovation” (for example, place it in an institutional repository or publish in their book), while confirming its initial publication in the journal “Science and innovation.” Authors are allowed to place their work on the Internet (for example, in institutional repositories or on their website).