Technology for Anticorrosive Protection of Steel Structures by Coatings Based on Rapid-Setting Bitumen-Latex Emulsion

Authors

  • H.M. Nykyforchyn Karpenko Physical-Mechanical Institute, the NAS of Ukraine, Lviv
  • V.A. Chervatyuk Karpenko Physical-Mechanical Institute, the NAS of Ukraine, Lviv
  • V.I. Marukha Techno-Resource, the NAS of Ukraine, Lviv
  • Z.V. Slobodyan Karpenko Physical-Mechanical Institute, the NAS of Ukraine, Lviv
  • І.M. Kushnir Karpenko Physical-Mechanical Institute, the NAS of Ukraine, Lviv
  • L.V. Stechnovych Karpenko Physical-Mechanical Institute, the NAS of Ukraine, Lviv

DOI:

https://doi.org/10.15407/scine12.01.028

Keywords:

adhesion, anticorrosive coating, bitumen-latex aqueous emulsion, emulsifier, inhibitor, initiator

Abstract

Mix formulas for rapid-setting bitumen-latex emulsions and coatings based on them have been designed; in-laboratory tests of their physical, chemical, and anticorrosive properties have been carried out. The technology for anticorrosive protection and the technical documents for preparing the aqueous bitumen-latex emulsion have been designed; a plant has been mounted and a pilot batch of rapid-setting emulsion has been produced. The technology has applied to pipelines in the oil and gas industry.

References

Nykyforchyn G.M., Poljakov S.G., Chervatjuk V.A. Micnist’ i dovgovichnist’ naftogazovyh truboprovodiv i rezervuariv. L’viv: SPOLOM, 2009. Tom 11 [in Ukrainian].

Chervatjuk V.A., Perminova I.M. Suchasni tendencii’ u za stosuvanni protykorozijnyh pokryttiv dlja zahystu magistral’nyh naftogazoprovodiv ta rezervuariv. Fiz.-him. mehanika materialiv. Spec. vypusk N 8. L’viv, IFTUNG, 2010. Tom 2: 625—630 [in Ukrainian].

Chervatjuk V.A., Kushnir I.M. Perspektyvy vykorystannja zahysnyh pokryttiv na osnovi vodnyh bitumno-polimernyh emul’sij dlja antykorozijnogo zahystu ob’jektiv naftogazovogo kompleksu. Fiz.-him. mehanika materialiv. Spec. vypusk N 9. L’viv, IFTUNG, 2012. Tom 2: 677—683 [in Ukrainian].

Chervatjuk V.A., Kushnir I.M. Protykorozijni pokryvy na osnovi vodnoi’ bitumno-polimernoi’ kompozycii’ z velykoju shvydkistju formuvannja. Fiz.-him. mehanika materialiv. 2013, N 3: 110—113 [in Ukrainian].

Chervatjuk V.A., Kushnir I.M., Vollis O.Je. Systema antykorozijnogo pokryttja na osnovi bitumno-polimernoi’ kompozycii’. L’viv: Vydavnyctvo NU «L’vivs’ka politehnika», Visnyk «Himija, tehnologija rechovyn ta i’h zastosuvannja», 2013: 261—264 [in Ukrainian].

Rozenfel’d I.A., Rubinshtejn F.I. Antikorrozionnye gruntovki i ingibirovannye lakokrasochnye pokrytija. Moskva: Himija, 1980 [in Russian].

Serednickij Ja.A., Mindjuk A.K., Celjuh O.I. i dr. Povyshenie zashhitnyh harakteristik bitumnyh pokrytij modifikaciej ingibitorami korrozii. Fiz.-him. mehanika materialov. 1986, N 6: 88—91 [in Russian].

Slobodjan Z.V., Vasylyk A.V., Zhovnirchuk V.M. ta in. Vplyv ingibitora Nefgan-1 na korozijnu ta biologichnu aktyvnist’ gruntiv. Fiz.-him. mehanika materialiv. 1999, N 6: 85—87 [in Ukrainian].

Nykyforchyn G., Maglatjuk L., Vrecena N., Slobodjan Z. Novi spoluky hromat, molibdat i vol’framat 1,2,3 benzotryazoliju jak polifunkcional’ni ingibitory korozii’. Visn. Ternop. derzh. tehn. un-tu. 2006, 11(1): 17—24 [in Ukrainian].

GOST 11501—78. Bitumy neftjanye. Metod opredelenija glubiny pronikanija igly [in Russian].

Downloads

Published

2024-08-19

How to Cite

Nykyforchyn, H., Chervatyuk, V., Marukha, V., Slobodyan, Z., Kushnir І., & Stechnovych, L. (2024). Technology for Anticorrosive Protection of Steel Structures by Coatings Based on Rapid-Setting Bitumen-Latex Emulsion. Science and Innovation, 12(1), 28–35. https://doi.org/10.15407/scine12.01.028

Issue

Vol. 12 No. 1 (2016): Science and Innovation

Section

Research and Engineering Innovative Projects of the National Academy of Sciences of Ukraine

License

Copyright (c) 2024 Copyright Notice Authors published in the journal “Science and Innovation” agree to the following conditions: Authors retain copyright and grant the journal the right of first publication. Authors may enter into separate, additional contractual agreements for non-exclusive distribution of the version of their work (article) published in the journal “Science and Innovation” (for example, place it in an institutional repository or publish in their book), while confirming its initial publication in the journal “Science and innovation.” Authors are allowed to place their work on the Internet (for example, in institutional repositories or on their website).

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.