Creation of Polyurethane and Urethane Foam Injectable Materials and Their Pilot Production; Development and Implementation of Technology for Strengthening and Rehabilitating the Damaged Constructions and Buildings
DOI:
https://doi.org/10.15407/scine11.01.072Keywords:
constructions, injectable materials, rehabilitationAbstract
The polyurethane and urethane foam injectable materials that are highly competitive with foreign analogues have been designed. A technique for repair and consolidation of cracked concrete and reinforced concrete structures and buildings has been developed. Standard technical documents for the injectable materials and technological processes have been elaborated. A trouble-shooting and repairing complex for implementing the above technique has been designed, installed, and implemented on construction sites. The equipment has been designed and manufactured; a technique for serial production of «A» and «B» components of injectable polyurethane materials has been developed. The pilot batch has been manufactured. Technological processes for preparation and application of the «A» and «B» components of injecting materials in industrial conditions have been elaborated and implemented.
References
Panasyuk, V.V. Marukha, V.I., and Sylovanyuk, V.P. (2014). Injection Technologies for the Repair of Damaged Concrete Structures. Dordrecht: Heidelberg: New York: London: Springer.
https://doi.org/10.1007/978-94-007-7908-2
Panasyuk, V. Sylovanyuk, V., and Marucha, V.: Static and Cyclic Strength of A Cracked Body Which Strengthened by Injection Technologies. Acta Mechanica and Automatica, 1, 1, 85—88 (2007).
Marukha, V.I., Panasyuk, V.V., and Sylovanyuk, V.P. (2009). Mechanic Destruction and Strength of Materials. In: Panasyuk, V.V. (Ed.). Injection Technologies for Repair of Damaged Structures after Long Exploitation, 12. Lviv: SPOLOM (in Ukrainian).
Marukha, V.I., Serednitskiy, Ya.A., Hnyp, I.P., and Sylovanyuk, V.P.: Development of Injection Techniques and Creation of Mobile Complex for Trouble-shooting and Repair of Concrete and Reinforced Concrete Structures Operated under Conditions of Corrosion and Mechanical Destruction. Science and Innovation, 3, 5, 55—62 (2007) (in Ukrainian).
Marukha, V.I., Serednitskiy, Ya.A., Pichugin, A.T., et al.: Development and Production of Pilot Equipment and Creation of Shop for Production of Polyol Components of Polyurethane Injectable Materials. Science and Innovation, 5, 17—24 (2009) (in Ukrainian).
Marukha, V.I., Fedirko, V.M., Serednitskiy, Ya.A., et al.: De velopment of Binary Polymer Materials of Cold Solidification and Their Application in Industry. Science and Innovation, 8, 5, 49—56 (2012) (in Ukrainian).
Golushkova, L., Galan, I., Neprila, M., and Gulai, O.: Influence of Polyether and Isocyanate Components on Viscosity of Polyurethane Composites at Their Condensation Polymerization. Bulletin of Ternopil STU, 11, 1, 31-37 (2006) (in Ukrainian).
Serednitskiy, Ya.A.: Influence of the Structure of Polyether Block and Isocyanate Components on the Properties of Polyurethane Elastomers. Composite Polymer Materials, 2, 45—50 (2001) (in Ukrainian).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Copyright Notice Authors published in the journal “Science and Innovation” agree to the following conditions: Authors retain copyright and grant the journal the right of first publication. Authors may enter into separate, additional contractual agreements for non-exclusive distribution of the version of their work (article) published in the journal “Science and Innovation” (for example, place it in an institutional repository or publish in their book), while confirming its initial publication in the journal “Science and innovation.” Authors are allowed to place their work on the Internet (for example, in institutional repositories or on their website).
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
