Cryogenic Equipment for Low-Temperature Hardening of Instruments and Machinery for Needs of Machine Building and Rolling Production
DOI:
https://doi.org/10.15407/scine10.03.035Keywords:
cryoblasting system, cryostat, hardening, instrument, machinery, rolls, thermal treatmentAbstract
A temperature-controlled nitrogen cryostat with embedded high-temperature thermally insulated container holder of treated objects has been created for low-temperature hardening of instruments and machinery. To control the surface temperature of rolls a system for cryoblasting of rolls by nitrogen gas-fluid mixture has been designed.
References
Guliayev, A.P.: Разложение остаточного аустенита при температурах ниже 0°C. Bulletin of Engineers and Technicians, 5, 7—11 (1937) (in Russian)
Guliayev, A.P. (1953). Heat Treatment of Steel. Moscow: GNTI (in Russian).
http://www.krioxolod.com.ua/kameryteplo-xolod-vlaga/obrabotka-metallov-x.
Plicht, G., Schillak, H., et al.: Method and Apparatus for Discharging a Non-Linear Cryogen Spray Across the Width of a Mill Stand. Patent WO 2009/032700. B21 B 27/06 (2009).
Ghosh, R., and Zurecki, Z.: Method of Shaping and Forming Work Materials. U.S. Patent no. 7 390 240; MPK B24 B 1/00; Appl. US 2007/0087664A1 Air Products and Chemicals (2008).
Zharkov, I.P., Krot, P.V., Palamarchuk, S.P., et al.: Equipment for Cooling of Rolled Plates and Rolls. Patent of Ukraine on Useful Invention no. 84215 / MPK B21B 43/00, Bulletin , 19 (2013) (in Ukrainian).
Zharkov, I.P., Dordienko, O.M., Krot, P.V., et al: Nitrogen Cryostat for Wide-Range Heat Treatment of Materials. Patent of Ukraine on Useful Invention no. 84214 / MPK G05 D 23/30, Bulletin, 19 (2013) (in Ukrainian).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Copyright Notice Authors published in the journal “Science and Innovation” agree to the following conditions: Authors retain copyright and grant the journal the right of first publication. Authors may enter into separate, additional contractual agreements for non-exclusive distribution of the version of their work (article) published in the journal “Science and Innovation” (for example, place it in an institutional repository or publish in their book), while confirming its initial publication in the journal “Science and innovation.” Authors are allowed to place their work on the Internet (for example, in institutional repositories or on their website).
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.