Changes of the slab structure of constitution scandate SrLaScO4 at the isovalent substitution of strontium atoms

Authors

  • Y.A. Titov Taras Shevchenko National University of Kyiv
  • N.M. Belyavina Taras Shevchenko National University of Kyiv
  • M.S. Slobodyanik Taras Shevchenko National University of Kyiv
  • V.V. Chumak Zhytomyr Ivan Franko State University

DOI:

https://doi.org/10.15407/dopovidi2019.07.059

Keywords:

calcium, isomorphism, lanthanum scandates, Rietveld method, slab perovskite-like structure, strontium, X-ray powder diffraction

Abstract

The substitution conditions of scandium atoms in SrLaScO4 slab perovskite-like structure (SPS) of Sr1–xCaxLaScO4- type (0 ⩽ x ⩽ 0,3) have defined by X-ray powder diffraction methods. SPS (Abma space group) of Sr0.7Ca0.3LaScO4 phase with a substitution degree of strontium atoms equal 0,3 is determined by the Rietveld procedure. The crystal structure of Sr0.7Ca0.3LaScO4 is formed by two-dimensional perovskite-like blocks consisting of a slab of distorted ScO6 octahedra joined by vertices. Blocks are separated by the slab of (Sr, Ca, La)О9 polyhedra. Analysis of the obtained data has shown that, in a case of the substitution of Sr atoms by Ca atoms in SPS of Sr1–xCaxLaScO4, a gradual reduction of the length of the (Sr, Ca, La) — О2 interblock bond and the increases of the deformation degree (Δ) of interblock (Sr,Ca,La)О9 polyhedra and the mutual inclination of octahedrons ScO6 take place. Reduction in the distance between perovskite-like blocks approaches a construction of SPS to the thermodynamically stable perovskite structure, and the increase of Δ(Sr, Ca, La)О9 strains and destabilizes SPS. The total effect of these factors leads to the destruction of SPS, limits the range of Sr1–xCaxLaScO4 solid solutions with a slab perovskite-like structure (0 ⩽ x ⩽ 0,3), and makes the formation of SrLaScO4 scandate with this type of structure impossible. The results obtained can be used to regulate the functional (electrophysical, optical, etc.) structurally dependent properties of the Sr1–xCaxLaScO4 phases by successively isovalent substitution atoms in the A-positions of their layered perovskite-like structure.

Downloads

References

Alexandrov, K. C. & Beznosikov, B. V. (2004). Perovskites. Present and future. Novosibirsk: Izd-vo SO RAN (in Russian).

Schaak, R. E. & Mallouk, T. E. (2002). Perovskites by design: a toolbox of solid-state reactions. Chem. Mater., 14, No. 4, pp. 1455-1471. doi: https://doi.org/10.1021/cm010689m

Kim, I. S., Kawaji, H., Itoh, M. & Nakamura, T. (1992). Structural and dielectric studies on the new series of layered compounds, strontium lanthanum scandium oxides. Mater. Res. Bull., 27, No. 10, pp. 1193-1203. doi: https://doi.org/10.1016/0025-5408(92)90227-Q

Kim, I.S ., Nakamura, T. & Itoh, M. (1993). Humidity sensing effects of the layered oxides SrO·(LaScO3)n (n = 1,2, ∞). J. Ceram. Soci. Jap., 101, No. 7, pp. 800-803. doi: https://doi.org/10.2109/jcersj.101.800

Kato, S., Ogasawara, M., Sugai, M. & Nakata, S. (2002). Synthesis and oxide ion conductivity of new layered perovskite La1–xSr1+xInO4–d. Solid State Ionics, 149, No. 1-2, pp. 53-57. doi:https://doi.org/10.1016/S0167-2738(02)00138-8

Titov, Yu., Nedilko, S. G., Chornii, V., Scherbatskii, V., Belyavina, N., Markiv, V. & Polubinskii, V. (2015). Crystal structure and luminescence of layered perovskites Sr3LnInSnO8. Solid State Phenomena, 230, pp. 67-72. doi: https://doi.org/10.4028/www.scientific.net/SSP.230.67

Ueda, K., Yamashita, T., Nakayashiki, K., Goto, K., Maeda, T., Furui, K., Ozaki, K., Nakachi, Y., Nakamura, S., Fujisawa, M. & Miyazaki, T. (2006). Green, orange, and magenta luminescence in strontium stannates with perovskite-related structures. Jap. J. Appl. Phys., 45, No. 9A, pp. 6981-6983. doi: https://doi.org/10.1143/JJAP.45.6981

Titov, Y. O., Belyavina, N. M., Slobodyanik, M. S., Babaryk, А. А. & Timoschenko, М. V. (2017). Influence of composition on organization of layered perovskite-like structure of indates AIILаInO4. Dopov. Nac. akad. nauk Ukr., No. 4, pp. 70-75 (in Ukrainian). doi: https://doi.org/10.15407/dopovidi2017.04.070

Dashevskyi, M., Boshko, O., Nakonechna, O. & Belyavina, N. (2017). Phase transformations in equiatomic Y–Cu powder mixture at mechanical milling. Metallofizika i Noveishie Tekhnologii, 39, No. 4, pp. 541-552. doi: https://doi.org/10.15407/mfint.39.04.0541

Patel, R., Simon, C. & Weller, M. T. (2007). LnSrScO4 (Ln = La, Ce, Pr, Nd and Sm) systems and structure correlations for A2BO4 (K2NiF4) structure types. J. Solid State Chem., 180, pp. 349-359. doi: https://doi.org/10.1016/j.jssc.2006.10.023

Shannon, R. D. (1976). Revised effective ionic radii and systematic studies of interatomic distances in halides and halcogenides. Acta Crystallogr., A32, pp. 751-767. doi: https://doi.org/10.1107/S0567739476001551

Downloads

Published

21.04.2024

How to Cite

Titov, Y., Belyavina, N., Slobodyanik, M., & Chumak, V. (2024). Changes of the slab structure of constitution scandate SrLaScO4 at the isovalent substitution of strontium atoms . Reports of the National Academy of Sciences of Ukraine, (7), 59–65. https://doi.org/10.15407/dopovidi2019.07.059

Issue

No. 7 (2019): Reports of the National Academy of Sciences of Ukraine

Section

Chemistry

License

Copyright (c) 2024 Reports of the National Academy of Sciences of Ukraine

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Most read articles by the same author(s)

1 2 3 4 > >>