Predicting the quality of a desired product in periodic technologies

Authors

  • V. I. Bol’shakov
  • V.N. Volchuk
  • Yu. I. Dubrov

DOI:

https://doi.org/10.15407/dopovidi2014.11.077

Keywords:

desired product, predicting, quality

Abstract

It is shown that, for the prediction of the desired product quality in a batch technology, it is enough to apply statistical methods to evaluate the chemical composition of the starting material and to analyze the process conditions on the example of the production of rollers. To obtain reliable results under the production conditions, the use of the heuristic procedures during passive and active experimentations is proposed.

Downloads

References

Bolshakov V. I., Volchuk V. M., Dubrov Yu. I. Visn. NAN UKr., 2013, No 8: 66–72 (in Ukrainian)

Bolshakov V. I., Volchuk V. M., Dubrov Yu. I. Metallovedenie i termich. obrabotka metallov, 2013, No 4: 5–11 (in Russian).

Bolshakov V. I., Volchuk V. M., Dubrov Yu. I. Metallovedenie i termich. obrabotka metallov, 2014, No 1: 19-42 (in Russian).

Bolshakov V. I., Dubrov Yu. I. Dopov. Nac. akad. nauk Ukr., 2004, No 11: 95–102 (in Russian).

Bolshakov V. I., Volchuk V. M., Deyneko L. N., Dubrov Yu. I. The composition method of planning of extreme experiments and expert information to generate quality forecast system materials. In: Future tasks of engineering science. Iss. 2 (Ed. Bolshakov V. I.), Dnepropetrovsk: GAUDEAMUS, 2001: 203–208 (in Russian).

Krivosheev A. E. Cast rolls, Moscow: Metallurgizdat, 1957 (in Russian).

Ivakhnenko A. G. Freedom of choice of a computer! In: Ergatic management system, Kiev: Nauk. dumka, 1974: 17–22 (in Russian).

Bolshakov V. I., Dubrov Yu. I., Tkachenko A. N., Tkachenko V. A. Dopov. Nac. akad. nauk Ukr. 2006, No 4: 97–102 (in Russian).

Dubrov Yu. I., Frolov V. V., Vakhnin A. N. Ekonomika i mat. metody, 1986, No 1: 165–170 (in Russian).

Dubrov Yu. I. Dopov. Nac. akad. nauk Ukr., 2002, No 3: 190–197 (in Russian).

Downloads

Published

11.03.2025

How to Cite

Bol’shakov, V. I., Volchuk, V., & Dubrov, Y. I. (2025). Predicting the quality of a desired product in periodic technologies . Reports of the National Academy of Sciences of Ukraine, (11), 77–81. https://doi.org/10.15407/dopovidi2014.11.077

Issue

No. 11 (2014): Reports of the National Academy of Sciences of Ukraine

Section

Materials Science

License

Copyright (c) 2025 Reports of the National Academy of Sciences of Ukraine

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.