Heat-Resistance of the Powder Cobalt Alloys Reinforced by Niobium or Titanium Carbide
DOI:
https://doi.org/10.15407/scin12.01.005Keywords:
cobalt alloys, heat resistance, niobium carbide, titanium carbideAbstract
The characteristics of heat-resistance of powder cobalt alloys at 1100 °C were investigated. These alloys were developed for the protection of workers banding shelves GTE blades from wear. The alloys were prepared by hot pressing powders of cobalt, chromium, aluminum, iron and niobium or titanium carbides. The values of heat resistance alloys containing carbides between 30 and 70% (vol.) depend on the type made of carbide alloys: alloys with titanium carbide superior in heat-resistant alloy of niobium carbide. The most significant factor affecting on the heat-resistant alloys, is porosity: with its increase the parameters decline regardless of the type and content of carbide. The optimum composition of powder heat resisting alloys of titanium carbide with a melting point above 1300 °C were determined for use in the aircraft engine.
References
Pat. Ukrai’ny N 8240A. Splav na osnovi kobal’ta. Shurin A.K., Dmytrijeva G.P., Cherepova T.S. ta in. [in Ukrai nian].
Pat. Ukrai’ny na korysnu model’ N 39450. Splav na osnovi kobal’tu. Shurin A.K., Cherepova T.S., Andrijchenko N.V., Zamkovyj V.Je. [in Ukrainian].
Shurin A.K., Dmitrieva G.P., Matjushenko N.I., Maksjuta I.I., Cherepova T.S. Vysokotemperaturnaja solevaja korrozija kobal’t-karbidnyh jevtekticheskih splavov. Zashhita metallov. 1990, 26(4): 659—661 [in Russian].
Supersplavy II. Zharoprochnye metally dlja ajerokos mi cheskih i promyshlennyh ustanovok. Per. s angl. Red. Sims. Ch.T. Moskva: Metallurgija, 1995 [in Russian].
Zharoprochnye splavy na osnove kobal’ta dlja prime nenija v gazovyh turbinah. Mater. Sci. and Eng. 1987 — 88. R. 11—19 [in Russian].
Reznik I.D., Sobol’ S.N., Hudjakov V.M. Kobal’t. Mos kva: Mashinostroenie. 1995, T. 1. 1996. T.2 [in Russian].
Physical Properties of Materials, Materials Engineering — Materials Selector — 1987. dec. 1986. v. 103. N T — 12. Р. 81—83.
Cherepova T.S., Dmytrijeva G.P., Nosenko A.V, Semyrga O.M. Znosostijkyj splav dlja zahystu kontaktnyh poverhon’ robochyh lopatok aviacijnyh dvyguniv vid okyslennja pry vysokyh temperaturah. Nauka innov. 2014, 10(4): 22—31 [in Ukrainian]. https://doi.org/10.15407/scin10.04.022
Vojtovich R.F. Okislenie karbidov i nitridov. Kyiv: Nauk. dumka, 1981 [in Russian]. 10. Jenciklopedija neorganicheskih materialov. Kyiv, 1977. T. 1. [in Russian].
