Modeling of Thermomechanical Processes in Energetic Equipment Elements Under In-Service Conditions and Estimation of their Operational Life with Accounting for a Material Degradation, Damages and Repair Procedures
DOI:
https://doi.org/10.15407/scin9.01.021Keywords:
mathematical and numerical simulation, strength and operational life.Abstract
Approach for computer simulation of deformation processes in power equipment elements under exploitation with regard of material degradation, shape of operational damages or change of element shape after repair based on three-dimensional elastolasticity is proposed. The stress-strain state of high pressure boiler drum and connecting pipes with repair excavations of material defects, collectors with cracks and waterwall tubes with operating thinnings are investigated. The recommendations are used in the development of repair technology and estimation of operational resource of power equipment elements at the Burshtyn TPP.
References
Osnovnye polozhenija po obsledovaniju i tehnologii remonta barabanov kotlov vy sokogo davlenija iz stali 16GNM, 16GNMA i 22K. Moskva: Izd. Ministerstva jelektri fikacii SSSR, Ministerstva jenergeticheskogo mashinostroenija, 1978. 38 s. [in Russian].
Instrukcija SOU 40.1-21677681-02:2009. Porjadok prodovzhennja terminu eksplua tacii' barabaniv kotliv vysokogo tysku. Kyiv: Vyd. Ob’jednannja energetychnyh pidpryjemstv «Galuzevyj rezervno-investycijnyj fond rozvytku energetyky», 2009. 56 s. [in Ukrainian].
Kotly stacionarnye i truboprovody para i gorjachej vody. Normy rascheta na prochnost. OST 108.031.08-85 - OST 108.031.10-85. Moskva: Izd. Ministerstva jenergeti cheskogo mashinostroenija, 1987. 118 s. [in Russian].
Allen D.H., Heisler W.E. A theory for analysis of ther moplastic materials. Computers & Structures. 1981. V. 13. P. 129-135.
https://doi.org/10.1016/0045-7949(81)90117-6
Zienkiewicz O.C., Wood W.L., Nine N.W. A unified set of single step algorithm. Part 1: general formulation and applications. Int. J. for Num. Meth. in Eng. 1984. 20. P. 1529-1552.
https://doi.org/10.1002/nme.1620200814
Pasport parovogo kotla No. 18/TP-100, izgotovlennogo 6 fevralja 1964 g. (registra cionnyj No. I696) [in Russian].
Svojstva stalej i splavov, primenjaemyh v kotloturbo stroenii. Rukovodjashhie ukazanija. Vyp. 16. Chast. Avtory sostavle nija L.Ja. Liberman, M.I. Pej sihis. Leningrad: ONTI CKTI im. I.I. Polzunova, 1966. 220 s. [in Russian].
Modeljuvannja ta optymizacija v termomehanici elektroprovidnyh neodnorid nyh til. Pid zag. red. Ja.J. Buraka, R.M. Kushnira. T.4: Termomehanika namagnechuvanyh elektroprovidnyh termochutlyvyh til. O.R. Gachkevych, B.D. Drobenko. L'viv: SPOLOM, 2010. 256 s. [in Ukrainian].
Nemchenko V.I., Vasylyk A.V., Zadorozhnyj M.V. ta in. Optymizacija za napruzhennjamy geometrychnyh parametriv remontnyh vybirok poshkodzhen' barabana kotla vysokogo tysku. Energetyka i elektryfikacija, No. 6. 2011. S. 22-28 [in Ukrainian].
Panasjuk V.V. Mehanika kvazihrupkogo razrushenija materialov. Kyiv: Nauk. dumka, 1991. 416 s. [in Russian].
Mehanika rujnuvannja ta micnist' materialiv. Dovidkovyj posibnyk, t. 8. Pid zag. red. V.V. Panasjuka. K.: Akademperiodyka, 2005. 542 s. [in Ukrainian].
