Multi-Probe Hardware for Electrometry of Oil and Gas Wells

Authors

  • M.L. Myrontsov Institute of Telecommunications and Global Information Space, the NAS of Ukraine

DOI:

https://doi.org/10.15407/scine14.03.051

Keywords:

electrometry, induction logging, oil and gas well, resistivity logging

Abstract

Introduction. The research aims at the creation of electrometry equipment capable of solving the actual problems of geophysical exploration of oil and gas wells.
Problem Statement. The existing equipment in Ukraine is not capable of reliably solving the problems of geophysical exploration of oil and gas wells in the conditions of Dnieper-Donets Basin. 
Purpose. Creation and well testing of appropriate equipment with a high spatial resolution. 
Materials and Methods. Combining potential probes that enable to restore the electric potential along the borehole axis and to solve the inverse problem with a high spatial resolution, a multi-probe resistivity logging tool has been created. Using the frequency scanning method, a multi-probe induction logging tool has been created. 
Results. Well tests of the developed equipment in the conditions of a terrigenous cut have been carried out and its efficiency has been compared with the existing equipment in Ukraine.
Conclusion. The developed resistivity logging equipment has a higher resolution than BKZ + BK + AIK, it is also easier to operate, since it is configured as one device, instead of three separate ones. The developed induction logging equipment has the same vertical spatial resolution as the AIK probe, but enables to define the geo-electrical parameters of reservoir layers without involving other research methods.

References

Anderson, B.I. (2001). Modeling and inversion methods for the interpretation of resistivity logging tool response. Delft:

Delft University Press.

Myrontsov, M.L. (2012). Numerical modeling of electrometry in wells. Kyiv: Naukova dumka [in Ukrainian].

Myrontsov, M.L. (2012). Efficient investigation method for complex structures and anisotropic formations in clastic

deposits. Dopov. Nac. akad. nauk Ukr., 5, 119—125 [in Russian].

Myrontsov, M.L. (2012). Hardware-methodical complex for the investigation of collectors with abnormally low resistance. Dopov. Nac. akad. nauk Ukr., 1, 117—122 [in Russian].

Myrontsov, M.L. (2012). Investigation method for «wrong» formations and the relict oil content under the well logging. Dopov. Nac. akad. nauk Ukr., 4, 100—106 [in Russian].

Yegurnova, M.G, Zaikovsky, M.Ya., Zavorotko, Y.M., Tsoha, O.G., Knishman, O.Sh., Mulyr, P.M., Demyanenko, I.I.

(2005). Oil and gas prospecting facilities of Ukraine. Oil gas capacity and features of lithoheophysical construction of the deposits of the lower Carboniferous and Devonian of the Dnipro-Donets Depression. Kyiv: Naukova dumka [in Ukrainian].

Myrontsov, M.L. (2012). On the relation of characteristics of spatial resolution of logging sounding equipment and

efficiency of solving inverse problems. Geoph. Journ. (Geophysical journal), 34(3), 155—159 [іn Russian].

Myrontsov, M.L. (2012). A method of solving inverse problem of electro-logging. Geoph. Journ. (Geophysical journal),

(4), 193—198 [in Russian].

Epov, M.I., Antonov, Yu.N. (Eds.). (2000). Technology of exploration of oil and gas wells based on VIKIZ. Methodical

guide. Novosibirsk: NIC OIGGM SO RAN [in Russian].

Myrontsov, M.L. (2012). Analysis of the capabilities of the standard electrometry complex for solving urgent problems of wells geophysical studies. Geoph. Journ. (Geophysical journal), 34(1), 159—170 [in Russian].

Myrontsov, M.L. (2013). A method of construction of a geoelectrical model of reservoir bed by the data of borehole

electrical measurements. Dopov. Nac. akad. nauk Ukr., 3, 102—105 [in Russian].

Myrontsov, M.L. (2013). One possible method of accuracy increase for the solution of an inverse problem in borehole electrical measurements. Dopov. Nac. akad. nauk Ukr., 4, 93—96 [in Russian].

Dahnov, V.N. (1967). Electrical and magnetic well-logging methods. Moscow: Nedra [in Russian].

Myrontsov, M.L. (2011). Method for increasing the efficiency of solving the inverse problem of logging sounding by

the BKZ-BK-IR complex. Geoinformatika (Geoinformatics), 2, 43-47 [in Russian].

Myrontsov, M.L. (2003). To calculate the coefficients of electric logs probes. Dopov. Nac. akad. nauk Ukr., 11, 120-

[in Ukrainian].

Hamatdinov, R.T. (Ed.). (2002). Technical Instructions for Conducting Geophysical Research and Works on Cable

Devices in Oil and Gas Wells. Moscow: Ministry of energy: «GERS» [in Russian].

Patent of Ukraine № 81172. Myrontsov M.L. Method of symmetrical lateral multiprobe logging sounding [in Ukrainian].

Myrontsov, M.L. (2007). Method of solving the direct and reverse problem of electric logging. Dopov. Nac. akad.

nauk Ukr., 2, 128—131 [in Ukrainian].

Patent of Ukraine № 81173. Myrontsov M.L. Method of frequency scanning with induction logging [in Ukrainian].

Myrontsov, M.L. (2007). A quick method of solving the inverse problem of induction logging. Geoph. Journ. (Geophysical journal), 29(5), 212—214 [in Ukrainian].

Myrontsov, M.L. (2009). Method for solving 2D inverse problem of induction logging. Geoph. Journ. (Geophysical

journal), 31(4), 196—203 [in Russian].

Myrontsov, M.L. (2010). Pulse lateral logging with high spatial resolution. Dopov. Nac. akad. nauk Ukr., 5, 120—122

[in Russian].

Myrontsov, M.L. (2010). A new principle of multiprobe electric logging. Dopov. Nac. akad. nauk Ukr., 6, 103—106

[in Russian].

Myrontsov, M.L. (2010). On the method of electromagnetic-pulse logging. Dopov. Nac. akad. nauk Ukr., 7, 110—112

[in Russian].

Downloads

Published

2024-09-02

How to Cite

Myrontsov, M. (2024). Multi-Probe Hardware for Electrometry of Oil and Gas Wells. Science and Innovation, 14(3), 51–56. https://doi.org/10.15407/scine14.03.051

Issue

Section

Research and Engineering Innovative Projects of the National Academy of Sciences of Ukraine