The Bauschinger effect in open-end thick-walled cylindrical pressure vessels
DOI:
https://doi.org/10.15407/dopovidi2017.11.024Keywords:
anisotropy, autofrettage, Bauschinger effect measure, open-end thick-walled pressure vesselsAbstract
The dependence of the Bauschinger effect measure in circular cylindrical thick-walled autofrettaged pressure vessels with one open end on the intensity of plastic strains under a proportional loading by internal pressure and torsion moment is studied. As an example, the Bauschinger effect measure is determined numerically for different ratios between hoop and tangential stresses. It is shown that the stressed state mode, which is characterized by the ratio of stresses, at small values of the anisotropy coefficient induced by the autofrettage weakly affects the Bauschinger effect measure. It increases with the anisotropy level. With the last being decreased, the Bauschinger effect diminishes.
Downloads
References
Buciumeanu, M., Palaghian, L., Miranda, A. A. & Silva, F. S. (2011). Fatigue life prediction including the Bauschinger effect. Int. J. of Fatigue, 33, No. 2, pp. 145-152. https://doi.org/10.1016/j.ijfatigue.2010.07.012
Ma, Q., Levy, C. & Perl, M. (2012). The impact of the Bauschinger effect on the stress concentrations and stress intensity factors for autofrettaged thick cylindrical pressure vessels. J. Pressure Vessel Technol., 134, No. 2, pp. 142-149. https://doi.org/10.1115/1.4005396
Bastun, V. N. & Podil'chuk, I. Yu. (2016). Modeling the Bauschinger effect in orthotropic materials with isotropic-kinematic hardening under isothermal and nonisothermal loadings. Dopov. Nac. akad. nauk Ukr., No. 7, pp. 39-48 (in Russian).
Bastun, V. & Podil'chuk, I. (2017). Bauschinger effect prediction in thick-walled autofrettaged cylindrical pressure vessels. J. Pressure Vessel Technol., 139(4), 041404. https://doi.org/10.1115/1.4036426
Parker, A. P. (2001). Autofrettage of open-end tubes — pressure, strains, and code-comparison. J. Pressure Vessel Technol., 123, pp. 271-281. https://doi.org/10.1115/1.1359209
Perl, M., Levy, C. & Rallabhandy, V. (2006). The influence of the Bauschinger effect on 3D stress intensity factors for internal radial cracks in a fully or partially autofrettaged gun barrels. J. Pressure Vessel Technol., 128, pp. 233-239. https://doi.org/10.1115/1.2172622
Ma, Q., Levy, C. & Perl, M. (2010). Stress concentration and stress intensity for pressurized eroded autofrettaged thick cylinders with Bauschinger effect. Proc. of the ASME Pressure Vessels and Piping Division Conference, pp. 1-8. https://doi.org/10.1115/PVP2010-25607
Bastun, V. N. & Kaminsky, A. A. (2005). Applied problems in the mechanics of strain hardening of structural metallic materials. Int. Appl. Mech., 41, No. 10, pp. 1092-1129. https://doi.org/10.1007/s10778-006-0017-z
Il'yushin, A. A. (1963). Plasticity. General mathematical theory. Moscow: Izd. AN SSSR (in Russian).
Kaminsky, A. A. & Bastun, V. N. (1985). Strain hardening and fracture of metals under variable loadings. Kyiv: Naukova. Dumka (in Russian).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Reports of the National Academy of Sciences of Ukraine
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.